Products

Overview The April board is a must have for anyone new to working with the Imp card and provides the SD card socket, 0.1" header, and ID chip to identify your card on the Imp Cloud service. The board, which exposes the imp's GPIO, standard bus, and power pins, requires 3.3V which can be supplied by the on-board mini-USB connector, or may be use...
Overview The April board is a must have for anyone new to working with the Imp card and provides the SD card socket, 0.1" header, and ID chip to i...
$10.00 $15.00
Overview The imp001 card makes designing your Internet-connected hardware very simple. The imp001 contains the processor, WiFi and antenna for a complete wireless network node.  If your design includes a few inexpensive components and simple routing rules, you can expect excellent, reliable WiFi performance. Application Examples The imp001 is i...
Overview The imp001 card makes designing your Internet-connected hardware very simple. The imp001 contains the processor, WiFi and antenna for a c...
$21.00
Overview The imp004m Breakout Board provides the imp004m module with a power supply, GPIO breakout, as well as the BlinkUP(TM) circuit and status LED, an optional 32kHz crystal and the required SPI flash containing the impOS image. Product Specifications  The imp004m Breakout Board integrates a 32-bit processor and WiFi radio into a single mod...
Overview The imp004m Breakout Board provides the imp004m module with a power supply, GPIO breakout, as well as the BlinkUP(TM) circuit and status ...
$29.93
Overview The imp004 is serial preprogrammed with the impOS. The imp004m requires an external 8Mbit (1MByte) to 128Mbit (16MByte) SPI flash programmed with the impOS image.  The impOS image is available for download from the Electric Imp website and uses the lower 776kBytes of the flash memory, leaving the me...
Overview The imp004 is serial preprogrammed with the impOS. The imp004m requires an external 8Mbit (1MByte) t...
$5.00
imp005-breakout provides basic life support for the imp005. The design includes power supply and GPIO breakout for the module, as well as the FCC/IC-approved dual-band (2.4/5GHz) antenna, an ethernet PHY and MagJack®, 32kHz crystal, and QSPI flash containing the impOS image. For more information on imp005 Breakout Boards, visit our dev center. ...
imp005-breakout provides basic life support for the imp005. The design includes power supply and GPIO breakout for the module, as well as the FCC/...
$45.00
Overview Serial flash pre-programmed with impOS for the imp005. The imp005 requires an external 32 to 64Mbit SPI flash to be programmed with the impOS image, which is available for download from the Electric Imp website. Developers without the capability to load the image to the Serial flash can purchase these 64Mbit Cypress S25FL164K0XMFI011 (...
Overview Serial flash pre-programmed with impOS for the imp005. The imp005 requires an external 32 to 64Mbit SPI flash to be programmed with the i...
$5.00

1 – 6 products of 14